Para desinstalar o Tails de um pendrive USB e usá-lo para alguma outra coisa, você deve resetá-lo.

The content of the USB stick is lost in the operation, but an attacker might still be able to tell that Tails was installed on that USB stick using data recovery techniques.

You might overwrite any hard disk on the computer.

If at some point you are not sure about which device to choose, stop proceeding.

  1. Tenha certeza de que o pendrive USB que você quer resetar esteja desconectado.

  2. Inicie o Utilitário de Disco.

    A list of all the storage devices on the computer appears in the left pane of the window.

  3. Conecte o pendrive USB que você quer resetar.

    A new device appears in the list of storage devices. This new device corresponds to the USB stick that you plugged in. Click on it.

  4. Na lista de dispositivos de armazenamento, verifique se o dispositivo corresponde ao pendrive que você deseja redefinir, sua marca, tamanho, etc.

  5. Para resetar o pen drive USB:

    a. If there is an Erase tab in the right pane, click on it and then click on the Erase button on the bottom right

    b. If there is an Erase button on the top middle, click on it.

  6. No dialogo de confirmação, clique no botão de Apagar para confirmar.

  7. In the Erase dialog, if you want the USB stick to also work on Windows and Linux, specify:

    • Format: MS-DOS (FAT)
    • Scheme: Master Boot Record
  8. Click Erase.

Se o processo de apagamento falhar , tente formatar o pendrive USB usando linha de comando primeiro.

Resetting a USB stick using the command line

  1. Desconecte o pendrive USB do computador.

  2. Open the Terminal utility from Applications ▸ Utilities.

  3. Execute the following command.

    diskutil list

    Ele retorna uma lista dos dispositivos de armazenamento no sistema. Por exemplo:

    /dev/disk0
     #:                     TYPE NAME         SIZE      IDENTIFIER
     0:    GUID_partition_scheme             *500.1 GB  disk0
     1:                      EFI              209.7 MB  disk0s1
     2:                Apple_HFS MacDrive     250.0 GB  disk0s2
     3:                      EFI              134.1 GB  disk0s3
     4:     Microsoft Basic Data BOOTCAMP     115.5 GB  disk0s4
    
  4. Conecte o pendrive USB que você quer resetar.

  5. Execute again the same command.

    diskutil list

    O seu pendrive USB aparece como um novo dispositivo na lista. Confirme se o tamanho que aparece corresponde ao tamanho do seu pendrive USB.

    /dev/disk0
     #:                     TYPE NAME         SIZE      IDENTIFIER
     0:    GUID_partition_scheme             *500.1 GB  disk0
     1:                      EFI              209.7 MB  disk0s1
     2:                Apple_HFS MacDrive     250.0 GB  disk0s2
     3:                      EFI              134.1 GB  disk0s3
     4:     Microsoft Basic Data BOOTCAMP     115.5 GB  disk0s4
    
    /dev/disk1
     #:                     TYPE NAME         SIZE      IDENTIFIER
     0:   FDisk_partition_scheme             *8.0 GB    disk1
     1:                Apple_HFS Untitled 1   8.0 GB    disk1s1
    
  6. Take note of the device name of your USB stick.

    In this example, the USB stick is 8.0 GB and its device name is /dev/disk1. Yours might be different.

    Se você não tiver certeza sobre o nome do seu dispositivo, você deverá parar o procedimento ou estará correndo o risco de sobrescrever algum disco rígido do sistema.

  7. Execute the following command to safely eject the USB stick. Replace device with the device name found in step 6.

    diskutil unmountDisk device

  8. Execute the following command to format the USB stick. Replace device with the device name found in step 6.

    sudo fdisk -iy device

  9. Você pode tentar resetar seu pendrive USB novamente usando o Utilitário de Disco como explicado no início desta página.