Чтобы удалить Tails с флешки (и использовать флешку для других задач), нужно очистить её.

The content of the USB stick is lost in the operation, but an attacker might still be able to tell that Tails was installed on that USB stick using data recovery techniques.

Using the Disks utility

You might overwrite any hard disk on the computer.

If at some point you are not sure about which device to choose, stop proceeding.

  1. Убедитесь, что флешка, которую вы хотите стереть, не подключена к компьютеру.

  2. Choose Applications ▸ Utilities ▸ Disks to start the Disks utility.

    Список всех носителей данных на компьютере будет виден в левой части окна.

  3. Plug in the USB stick that you want to reset.

    В списке появится новое устройство. Оно соответствует подключённой флешке. Выберите это устройство.

  4. В правой части окна убедитесь, что устройство соответствует флешке, которую вы хотите стереть (совпадают модель, объём и т.д.).

  5. To reset the USB stick, click on the Drive
Options button in the title bar and choose Format Disk to erase all the existing partitions on the device.

  6. In the Format Disk dialog:

    • If you want to overwrite all data on the device, choose Overwrite existing data with zeroes in the Erase menu.

      Overwriting existing data does not erase all data on flash memories, such as USB sticks and SSDs (Solid-State Drives).

      See the limitations of file deletion.

    • Choose Compatible with all systems and devices (MBR/DOS) in the Partitioning menu.

  7. Click Format.

  8. In the confirmation dialog, click Format to confirm.

  9. To make sure that all the changes are written to the USB stick, click on the Eject button in the title bar.

«Самостирание» флешки Tails

Если Tails — ваша единственная система Linux, вы можете стереть флешку Tails, используя эту же флешку.

  1. When starting Tails, add the toram boot option in the Boot Loader.

    See using the Boot Loader.

  2. If Tails starts as usual, follow the instructions for resetting a USB stick using the Disks utility.

    Если система не запускается, значит, компьютеру не хватает памяти для загрузки в этом режиме. Попробуйте проделать то же на другом компьютере или подыщите другую систему Linux для вашей задачи, скажем, другую флешку Tails.