Questa pagina descrive come avviare Tails da una chiavetta USB su Mac.

Avvio su Mac

  1. Assicurati di aver installato Tails usando o:

  2. Spegni il computer.

    Spegni il computer lasciando inserita la chiavetta USB.

    Inserisci l'altra chiavetta USB Tails dalla quale vuoi eseguire l'installazione.

  3. Plug in your Tails USB stick.

  4. Riaccendi il computer.

    Immediately press-and-hold the Option key ( or Altkey) when the startup chime is played.

    Hold the key pressed until a list of possible startup disks appears.

    Tasto
'option' o 'alt' in basso a sinistra nella tastiera Mac

  5. Seleziona la chiavetta USB e premi Invio. La chiavetta USB appare come un disco rigido esterno e può avere l'etichetta EFI Boot o Windows come nella seguente immagine da schermo:

    Schermo
con il logo di un disco rigido interno etichettato 'Macintosh HD' e un disco
rigido esterno etichettato 'Windows' (selezionato)

    If the USB stick does not appear in the list of startup disks:

    1. Wait a few minutes. Some USB sticks need some rest after installing.
    2. Make sure that you have installed Tails using either:

    3. Make sure that you have verified your download of Tails.

    4. Make sure that you have verified your download.

    5. Try installing again on the same USB stick.

    6. Try installing on a different USB stick.

    7. Try using the same USB stick to start on a different computer.

    If your computer still does not display the Boot Loader, it might currently be impossible to start Tails on your computer.

  6. Se il tuo Mac visualizza l'errore seguente:

    Security settings do not allow this Mac to use an external startup disk.

    Then you have to change the settings of the Startup Security Utility of your Mac to authorize starting from Tails.

    To open Startup Security Utility:

    1. Turn on your Mac, then press and hold Command(⌘)+R immediately after you see the Apple logo. Your Mac starts up from macOS Recovery.

    2. When you see the macOS Utilities window, choose Utilities ▸ Startup Security Utility from the menu bar.

    3. When you are asked to authenticate, click Enter macOS Password, then choose an administrator account and enter its password.

    Startup Security Utility

    In the Startup Security Utility:

    • Choose No Security in the Secure Boot section.

    • Choose Allow booting from external media in the External Boot.

    To still protect your Mac from starting on untrusted external media, you can set a firmware password, available on macOS Mountain Lion or later. A firmware password prevents users who do not have the password from starting up from any media other than the designated startup disk.

    If you forget your firmware password you will require an in-person service appointment with an Apple Store or Apple Authorized Service Provider.

    Read more on Apple Support about:

  7. Se il computer si avvia con Tails, appare il Boot Loader e Tails si avvia automaticamente dopo 4 secondi.

    Schermo nero ('GNU
GRUB') con il logo Tails e 2 opzioni: 'Tails' e 'Tails (Troubleshooting
Mode)'.

    • The Troubleshooting Mode entry disables some features of the Linux kernel and might work better on some computers. You can try this option if you think you are experiencing hardware compatibility errors while starting Tails.

    • The External Hard Disk entry makes it possible to start from an external hard disk and some problematic USB sticks.

Risoluzione dei problemi Tails non si avvia

Usa questa sezione se il computer non si avvia dalla chiavetta USB e il Boot Loader non compare:

Schermo nero
('GNU GRUB') con logo Tails e 2 opzioni: 'Tails' e 'Tails
(Modalità risoluzione dei problemi)'.

Verifica la tua chiavetta USB con Tails

  1. Wait a few minutes. Some USB sticks need some rest after installing.
  2. Assicurati di aver installato Tails usando o:

  3. Make sure that you have verified your download of Tails.

  4. Make sure that you have verified your download.

  5. Prova a installare di nuovo sulla stessa chiavetta USB.

  6. Prova a installare su un'altra chiavetta USB.

  7. Prova a usare la stessa chiavetta USB per avviare su un altro computer.

Se ricevi queto messaggio di errore con macOS

Potrebbe essersi verificato un problema con questa immagine del disco. Sei sicuro di volerla aprire?

Then, you have to install Tails using balenaEtcher.

Controlla la nostra lista dei problemi noti

Similar problems might have been reported already for your Mac model in our list of known issues about Tails not starting at all.

Troubleshooting Tails non si avvia dopo il Boot Loader

Usa questa sessione se, quando avvii Tails, compare il Boot Loader ma non la Schermata di Benvenuto.

Verifica la tua chiavetta USB con Tails

  1. Wait a few minutes. Some USB sticks need some rest after installing.
  2. Assicurati di aver installato Tails usando o:

  3. Make sure that you have verified your download of Tails.

  4. Make sure that you have verified your download.

  5. Prova a installare di nuovo sulla stessa chiavetta USB.

  6. Prova a installare su un'altra chiavetta USB.

  7. Prova a usare la stessa chiavetta USB per avviare su un altro computer.

Prova la voce Modalità Risoluzione dei Problemi

Nel Boot Loader, scegli la voce Modalità Risoluzione dei Problemi che con alcuni computer funziona meglio.

Prova la voce Disco Rigido esterno

Nel Boot Loader, scegliere la voce Disco rigido esterno, se disponibile. Alcune chiavette USB hanno bisogno di questa voce per avviare Tails.

Controlla il nostro elenco di problemi noti riguardo le schede grafiche

  • Se il computer visualizza il messaggio di errore Errore durante l'avvio di GDM con la tua scheda grafica fai riferimento al nostro ?elenco dei problemi noti con le schede grafiche.

  • In altro caso, fai riferimento alla nostra lista dei problemi noti riguardanti avvi incompleti di Tails. Potrebbe contenere una soluzione per il tuo modello di computer.